Cooper-instruments-systems DFI 1650 Multi-Channel Digital Force Indicator Manual do Utilizador Página 19
- Página / 89
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
CF 66 13 Rev. C 2/05
4.5 DFI SC3004
4.5.1 External Arrangement
Figure 4-5: External Arrangement of DFI SC3004
4.5.2 Rear Panel
The pinout for the 25-pin System connector is provided later in this chapter. The pinouts for the individual channels
are located in the chapter for that channel.
4.5.3 Panel Mounting
The panel space necessary conforms to the EIA 19” rack-mount standard. Panel mounting ears are attached to the
instrument.
4.5.4 Bench Mounting
Panel mounting ears are attached to the instrument, and may be removed if they are not needed.
4.5.5. Case Removal
Be sure to remove the power cord from the power source before attempting to remove the case from the
instrument.
Use a #0 Phillips screwdriver on all screws to avoid damaging them.
Step 1: Remove the four, silver rack-mounting ears from the left and right sides.
Step 2: Remove one Phillips screw from the top of the case.
Step 3: Remove two Phillips screws from the bottom of the black case cover.
Step 4: Remove the black case cover from the instrument.
Step 5: Remove eight Phillips screws from the rear panel, including the two cable shield connection screws.
NOTE: Do not remove the four screws that secure the cooling fan to the rear panel.
Step 6: Remove the rear panel.
4.5.6 Rear Panel
The pinout for the 25-pin System connector is provided later in this chapter.
- CONTENTS 2
- CF 66 iii Rev. C 2/05 3
- CF 66 iv Rev. C 2/05 4
- CF 66 v Rev. C 2/05 5
- CF 66 vi Rev. C 2/05 6
- 1.0 INTRODUCTION 7
- 1.2 Related Documents 8
- 1.3 What is the DFI Series? 8
- 1.3.1 Features 8
- 1.3.2 Chassis Models 8
- 1.3.3 Channel Types 8
- 1.4.1 Overview 9
- 1.4.2 Benefits 9
- 1.4.3 Information Stored 9
- 2.0 GETTING STARTED QUICKLY 10
- 3.0 OPERATING MODES 11
- 3.3 RUN Mode 12
- 3.3.1 Display 12
- 3.3.2 [VALUE] button 12
- 3.3.3 [CLEAR] button 12
- 3.3.4 [CHANNEL] button 12
- CF 66 7 Rev. C 2/05 13
- 4.0 CHASSIS MODELS 14
- 4.3 DFI 1550 and DFI 1650 15
- 4.3.1 Differences 15
- 4.3.2 External Arrangement 15
- 4.3.3 Rear Panel 15
- 4.3.4 Panel Mounting 15
- 4.3.5 Rack Mounting 16
- 4.3.6 Bench Mounting 16
- 4.3.7 Case Removal 16
- 4.3.8 Internal Arrangement 16
- CF 66 11 Rev. C 2/05 17
- CF 66 12 Rev. C 2/05 18
- CF 66 13 Rev. C 2/05 19
- 5.0 SYSTEM CONNECTOR 20
- CF 66 15 Rev. C 2/05 21
- 6.0 SYSTEM MENU 22
- CF 66 17 Rev. C 2/05 23
- 7.0 SERIAL COMMUNICATIONS 24
- CF 66 19 Rev. C 2/05 25
- 8.0 DISPLAY MENU 26
- 9.0 LIMITS 27
- 9.3.2 LIMIT.ENABLE Menu Item 28
- CF 66 23 Rev. C 2/05 29
- 9.3.8 LIMIT.SOURCE Menu Item 30
- 9.3.9 LEAVE MENU Menu Item 30
- 10.1 Features 30
- 10.2 Wiring 30
- 10.3 Calibration Procedure 31
- 10.4 Specifications 32
- 10.5 Channel Menu 32
- 10.5.1 OPERATION Sub-Menu 32
- DISPLAY.DIGITS Menu Item 33
- CF 66 28 Rev. C 2/05 34
- CF 66 29 Rev. C 2/05 35
- CF 66 30 Rev. C 2/05 36
- 10.5.6 CALIBRATE Menu Item 37
- 10.5.7 DAC SETUP Sub-Menu 38
- CF 66 33 Rev. C 2/05 39
- 10.5.9 DIAGNOSTICS Sub-Menu 40
- 10.6.2 Channel Menu Items 40
- 10.6.3 Output Selection 41
- 10.7 Troubleshooting 41
- 10.7.1 Error Messages 41
- 11.1 Features 42
- 11.2 Wiring 43
- 11.3 Calibration Procedure 43
- 11.4 Specifications 44
- 11.5 Channel Menu 44
- 11.5.1 OPERATION Sub-Menu 44
- POWER-ON SOURCE Menu Item 45
- CF 66 40 Rev. C 2/05 46
- 11.5.6 CALIBRATE Menu Item 47
- 11.5.7 DAC SETUP Sub-Menu 48
- 11.5.8 DIAGNOSTICS Sub-Menu 49
- 11.6.1 Overview 49
- 11.6.2 Procedure 49
- 11.7.2 Channel Menu Items 50
- 11.7.3 Output Selection 50
- 11.8 Troubleshooting 51
- 11.8.1 Error Messages 51
- 12.1 Features 51
- 12.2 Wiring 52
- 12.2.1 Channel Connector 52
- CF 66 47 Rev. C 2/05 53
- CF 66 48 Rev. C 2/05 54
- CF 66 49 Rev. C 2/05 55
- 12.3.1 Overview 56
- 12.3.2 Setting Jumpers 56
- 12.4 Calibration Procedure 57
- 12.5 Specifications 57
- 12.6 Channel Menu 58
- 12.6.1 OPERATION Sub-Menu 58
- 500. HERTZ 2 ±4000 ±2500 59
- 800. HERTZ 2 ±2500 ±2500 59
- CF 66 54 Rev. C 2/05 60
- CF 66 55 Rev. C 2/05 61
- 12.6.6 CALIBRATE Menu Item 62
- 12.6.7 DAC SETUP Sub-Menu 63
- 12.6.8 DIAGNOSTICS Sub-Menu 64
- 12.7.2 Channel Menu Items 64
- 12.7.3 Output Selection 65
- 12.8 Troubleshooting 65
- 12.8.1 Error Messages 65
- 13.0 RELAY OUTPUT CHANNEL 66
- 13.4 Specifications 67
- 13.5 Channel Menu 67
- 13.5.1 DIAGNOSTICS Sub-Menu 67
- 13.2 Wiring 67
- 13.3 Setup Procedure 67
- 14.0 DAC OUTPUT CHANNEL 68
- 14.4 Specifications 69
- 14.5 Channel Menu 69
- 14.5.1 DAC SETUP Sub-Menu 69
- 14.5.2 DIAGNOSTICS Sub-Menu 69
- CF 66 64 Rev. C 2/05 70
- 15.1 Features 71
- 15.2 Wiring 71
- 15.3 Setup Procedure 71
- 15.4 Channel Menu 71
- 15.5 Troubleshooting 72
- 16.1 Features 72
- 16.2 Wiring 72
- 16.5 Troubleshooting 74
- 17.0 ERROR MESSAGES 75
- CF 66 70 Rev. C 2/05 76
- CF 66 71 Rev. C 2/05 77
- 18.0 SETUP MENU REFERENCE 78
- Table 18-2: System Menu 79
- CF 66 74 Rev. C 2/05 80
- CF 66 75 Rev. C 2/05 81
- CF 66 76 Rev. C 2/05 82
- CF 66 77 Rev. C 2/05 83
- CF 66 78 Rev. C 2/05 84
- CF 66 79 Rev. C 2/05 85
- CF 66 80 Rev. C 2/05 86
- CF 66 81 Rev. C 2/05 87
- CF 66 82 Rev. C 2/05 88
- WARRANTY REPAIR POLICY 89
Manuais e produtos relacionados com Instrumentos de medida Cooper-instruments-systems DFI 1650 Multi-Channel Digital Force Indicator
Instrumentos de medida Cooper-instruments-systems DFI 7000 Digital Force Indicator Manual do Utilizador
(10 páginas)
(10 páginas)
Instrumentos de medida Cooper-instruments-systems DFI Infinity CS Economy Digital Indicator Manual do Utilizador
(36 páginas)
(36 páginas)
Instrumentos de medida Cooper-instruments-systems AP 30001 Mechanical Crane Scale Manual do Utilizador
(1 páginas)
(1 páginas)
Instrumentos de medida Cooper-instruments-systems PS Mechanical Force Gages Manual do Utilizador
(6 páginas)
(6 páginas)
Instrumentos de medida Cooper-instruments-systems Model 3i Basic Force/Torque Indicator Manual do Utilizador
(24 páginas)
(24 páginas)
Instrumentos de medida Cooper-instruments-systems Model 5i Advanced Force/Torque Indicator Manual do Utilizador
(35 páginas)
(35 páginas)
Instrumentos de medida Cooper-instruments-systems Series M2 Digital Force Gage Manual do Utilizador
(17 páginas)
(17 páginas)
Instrumentos de medida Cooper-instruments-systems Model 7i Professional Force/Torque Indicator Manual do Utilizador
(42 páginas)
(42 páginas)
Instrumentos de medida Cooper-instruments-systems Series M4 Digital Force Gage Manual do Utilizador
(23 páginas)
(23 páginas)
Instrumentos de medida Cooper-instruments-systems Series M3 Digital Force Gage Manual do Utilizador
(23 páginas)
(23 páginas)
Instrumentos de medida Cooper-instruments-systems M5-1000 High Capacity Digital Force Gage Manual do Utilizador
(28 páginas)
(28 páginas)
LG DLGY1902KE podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Suszarki LG DLGY1902KE.
Dostarczamy 1 pdf podręczników LG DLGY1902KE do pobrania za darmo według typów dokumentów: Arkusz Specyfikacji
Comentários a estes Manuais